Concrete crack repair with the 60 ft. DIY Foundation Crack Repair Kit is equipped with the necessary components, packed conveniently within a toolbox, for the proper repair of basement wall cracks up to 60 feet using low-pressure injection.
Read basic repair procedure
Repair kits allow a do-it-yourself homeowner/handyman or contractor to use the same materials and packaging that we supply professional contractors.
- Six dual cartridges 901 Surface Seal
- Twelve dual cartridges NextStar 121 Epoxy
- Blow Hole Repair/Port Adhesive
- Eight 1/4 x 32 element mixers & 8 retaining nuts
- Six cross-over restrictors w/Instructions
- One-hundred surface ports and caps
- Ten corner ports
- 4 hose assemblies
- NX-300 Manual dispensing tool (300/300-150ml)
- Safety glasses
- Ten pair rubber gloves
- Trowel & wire brush
- Step-by-step instructional CD-ROM
- MSDSs w/Instructions
- Tool box (optional)
( US Customer orders will shipped Via DHL at no extra cost)
Injection by Urethane Foam vs. Epoxy:
NextStar's 60 ft. D-I-Y Foundation Wall Crack Repair Kits are available with either urethane foam or epoxy injection .
Two component urethane rapidly expands when it comes in contact with moisture. Filling voids both within the crack and behind the wall, quickly hardening to a flexible and permanent repair.
When the structural integrity of the concrete is a problem, or believed to be a problem, epoxy is the preferred material for injection. Epoxies effectively seal cracks while reinforcing the repair area to be stronger than the non-repaired area around it. Free Shipping Seal & Peal option allows the surface paste to be removed should the surface need to be exposed or be completely flush after repair is completed , generaly not required.