HM 300  Grouting Epoxy
NextStar-technologies-concrete-foundation-crack-injection-repairItem DetailsPolurethane-crack-injection-kits
HM 300  Grouting Epoxy
Item Name:

HM 300 Grouting Epoxy

Item #:
HM 300
Price/ea:
$155.00 USD
Average Rating:
  In Stock
 Quantity:

Product Image Gallery:

PRODUCT DESCRIPTION
Emecole 300 HM Th ixo is a two-component, 100% solids, moisture insensitive, non-sag epoxy gel. It is formulatedas a high strength, high modulus adhesive and mortar binder. Emecole 300 HM develops high strength forgrouting dowels, for sealing cracks, honeycomb, tie rods and for vertical and overhead repairs of structural concrete.Emecole 300 HM is typically mixed with aggregate to yield a high-strength epoxy mortar (up to 70/30 by weightaggregate/300HM)

BENEFITS
Smooth gel consistency which is easy to work with; high strength; moisture insensitive; good bond strength andchemical resistance; mixes easily with aggregate.

CONFORMS TO
ASTM C-881 Types 1, 11, IV and V. Grade 3, Class B & C

SURFACE PREPARATION
Surfaces must be structurally sound, clean, dry and free of contaminates. Remove defective concrete, cavities, andother defects by routing to sound material. If possible, sandblast or acid- etch surfaces to provide a clean, absorptivesubstrate.

MIXING
Pre-mix Emecole 300 HM Part A and Part B separately. Combine one part of Part A resin to one part of Part B hardener( by weight or volume) in a clean container and mix thoroughly using a slow speed motor and paddle mixer. For mortar, mix one gallon by loose volume of #20 or #30 silica or quartz sand (25 pounds) up to one gallon of mixed 300HM.

COVERAGE
231 cubic inches per gallon neat; in the order of 360-462 cubic inches/gallon when aggregate is added.

PRECAUTIONS
Do not apply in temperatures below 40°F or to frozen, frost fi lled or damp surfaces. Use with adequate ventilation.
Emecole 300 HM contains an alkaline amine. Avoid breathing vapors and prolonged contact with the skin. Do no
use solvents to thin. Use only oven dried aggregate to make mortar. Maximum thickness is 1- 1/2 inches per lift .

2 gallons Epoxy for grouting block wall cracks and repair mortar

Your Concrete Foundation and Crack repair product supplier All Rights Reserved ©

Powered by Your NextStar, Inc
ASP.NET Shopping Cart Software