Cross-over/back-flow restrictor

Cartrige Contamination 

Eliminates contamination, metering, and re-usage problems associated with dual cartridge dispensing when using dual cartridges without a tongue to separate the two streams as they come out of the cartridges. Without the tongue, material from one cartridge can easily flow into the adjacent cartridge tube rather than fully progress through the static mixers.

This is referred to as cross-over and commonly occurs at the beginning of dispensing and can continue until the pressures are equalized on both cartridges. A barrier or “tongue” is common in automated dispensing equipment but not in dual cartridges.

The cross-over/back-flow restrictor

Can be placed over the “D shaped openings in the neck of dual cartridges to introduce a “tongue” to the system. In addition, the restrictor introduces one-way flaps over these cartridge openings. These flaps open when pressure is exerted on the cartridges but resist material from flowing back into the cartridges (either from the adjacent cartridge or the static mixers). This is known as back-flow.

Both cross-over and back-flow contaminate the materials in the cartridges and can lead to improper rationing and premature curing in the cartridges. The latter, in turn, leads to incomplete and possible improper use of products. This also prevents re-using a partially used cartridge set.

The cross-over/back-flow restrictor is an effective and economical adaptor optimizing the usage and performance of dual cartridges and dual cartridges dispensing for foundation crack repair.

Product Uses:

These flow restrictors generally are only used when a whole dual-tube of product is anticipated not to be completely used up and the user is planning another use at a later time.
Compatible with
Any Low Viscosity Product (Very Thin)
Medium Viscosity products

Not Compatible with
Epoxy pastes such as 901,902,302,E101 Flow resistance is too high.