121 HV Extra High Viscosity fast setting epoxy dual 300 ml tube is a thick low-pressure injection repair product designed to structurally repair wide concrete cracks and will cure down to 32 deg F.
|
Standard Crack Injection Polyurethane foam to repair wider cracks in concrete foundations in basements and crawl spaces. Closed cell foam will not water penetrate. Can be used with carbon fiber as it will not compress.
103 Injection Polyurethane
$39.00 USD $32.00 USD
InStock
|
903 is a Medium two hour setting port sealing paste epoxy. Used primarily for setting injection ports in place and general sealing over cracks before injection.Standard in Nextstar Kits.
|
Extra-low profile surface port for low-pressure crack injection. Use where the ports cannot protrude from the surface.Behind or hard to access areas.
Port LowPressure Extra Low Profile
|
Koster 2In1 resin polyurethane for low-pressure injection that will either react when contact with water or cure as an elastic resin without contact with water. Great for leaking foundation crack injections that have been repaired previously.
Koster 2IN1 Polyurethane Individual Tubeset
|
The medium-fast setting port sealing paste Epoxy is used primarily for setting injection ports in place and general sealing over cracks before injection and sets in less than an hour.
Paste 302 Port Setting Epoxy
|
E101 Epoxy Paste is a thick low pressure injection repair product designed to structurally repair a very wide crack 1/4 inch or wider and is compatible with other epoxy crack injection products.
Epoxy Tubeset E101 Injection Paste
|
Fast Emergency water stop for cracks or holes that are actively leaking. KD2 Blitz powder sets in seconds and is perfect for the setting of ports. Can apply to a wet wall before injection. 2.2 lb 1 Kg box.
|
Fast Emergency water stop for cracks or holes that are actively leaking through concrete walls. KD2 Blitz powder sets in seconds and is perfect for the setting of ports. Can be applied to wet walls before injection. 33lb pail.
KD2 Blitz Powder 33lb Pail
|
Auto-Injector capsules for self-injection pressures to 40 psi without special injection tools. Ideal for LV polyurethane foams or ULV slow setting epoxy. Perfect for a DIY one time repair.
|
Fast setting E555 crack repair for concrete slabs. Very low odor making it ideal for residential basements and Garage Floor cracks.
Fast Concrete Slab Crack Repair E555 Tubeset
|
Structural Polyurethane foam dual 300 ml cartridge injection repair product for wide cracks or holes or large voids and wall joints. Prevents compression, ideal for use with carbon fiber applications to reduce cost.
Polyurethane Structural Foam Tube set
|
Injection corner ports for low-pressure injection repairs in the corner or drilled injection locations. Can be used with all Epoxy and Polyurethane products.
Port Low Pressure CORNER Cracks
|
Standard Crack Injection Polyurethane foam to repair leaking smaller concrete foundation wall cracks in basements and crawl spaces. It Can be used when freeze-thaw expansion and contraction are present.
Polyurethane 102 Injection Foam Tubeset
|
Nut for attaching static mixers to all epoxy or polyurethane foams in dual tube sets.
Nut for Static Mixer 9 pitch
|
901 is a Medium fast setting port sealing paste epoxy. Used primarily for setting injection ports in place and general sealing over cracks before injection.One-hour cure time.
Paste 901 Port Setting Epoxy
|
121 EHV Extra High Viscosity fast setting epoxy dual 300 ml tube is a thick low pressure injection repair product designed to structurally repair wide concrete cracks and will cure down to 32 deg F.
Epoxy Tubeset 121 EHV Extra High Viscosity
|
121 MV Medium Viscosity fast setting Epoxy dual 300 ml tube is a low pressure injection repair product designed to structurally repair cracks from 1/32 to 1/4 inch wide and will cure down to 32 Deg F.
Epoxy Tubeset 121 MV Medium Viscosity
|
121 LV Low Viscosity fast setting Epoxy dual 300 ml tube is a low pressure injection repair product designed to structurally repair cracks generally less than 1/32 of an inch wide and will cure down to 32 deg F.
Epoxy 121 LV Low Viscosity
|
1-gallon Epoxy set for grouting block wall cracks and repair general structural mortar repair.
HM 300 Concrete Epoxy Paste
|
The cross-over back-flow restrictor eliminates cartridge cross contamination between side of a dual cartridge system. This allows unused product to be used later without contamination.
|
Injection ports for low-pressure concrete crack injection. Can be injected directly from a mixer or a feed hose. Use with all epoxy and polyurethane cartridge products.
Port Low Pressure STANDARD Injection
|
Low pressure crack injection feed hose assembly for hard to reach areas or extended injection time. Fits on the end of the standard mixer tube.
|
Static Mixer Nozzles Selector for all of our products. Polyurethane Foam or Epoxy injection products including concrete floor repair chemicals to cartridge systems.
|
Ultra low viscosity epoxy injection product for a structural crack repair of hairline cracks.
Epoxy Tubeset ULV #4 Ultra Low Viscosity
|
Category List
